Michael Ames

Predicting the distribution and release of tritium remains a technical challenge for advanced nuclear reactors with molten Flibe (2LiF-BeF2) salt coolants. Tritium transport models, which are currently used to forecast release behavior, are limited by uncertainty in Flibe-related tritium transport properties and by a lack of relevant benchmark experiments to test input parameters and solution methods. A new test facility has been developed at the Massachusetts Institute of Technology Research Reactor (MITR) to irradiate a molten Flibe target in an ex-core neutron beam port to further investigate tritium transport mechanisms at prototypical reactor conditions. The experiment monitored the time-dependent release of tritium from the salt-free surface and the permeation rate of tritium through the stainless steel Flibe-containing test stand. Measured results were benchmarked with a multiphysics tritium transport simulation to resolve complex effects in the test. Trends in tritium release rates from the irradiation were in agreement with the multiphysics simulation of the test, which combined computational fluid dynamics, radiative heat transfer in participating media, and tritium transport in STAR-CCM+.

Current generation light water reactors (LWRs), sodium cooled fast reactors (SFRs), small modular reactors (SMRs), and next generation nuclear plants (NGNPs) produce harsh environments in and near the reactor core that can severely tax material performance and limit component operational life. To address this issue, several Department of Energy Office of Nuclear Energy (DOE-NE) research programs are evaluating the long duration irradiation performance of fuel and structural materials used in existing and new reactors. In order to maximize the amount of information obtained from Material Testing Reactor (MTR) irradiations, DOE is also funding development of enhanced instrumentation that will be able to obtain in-situ, real-time data on key material characteristics and properties, with unprecedented accuracy and resolution. Such data are required to validate new multi-scale, multi-physics modeling tools under development as part of a science-based, engineering driven approach to reactor development. It is not feasible to obtain high resolution/microscale data with the current state of instrumentation technology. However, ultrasound-based sensors offer the ability to obtain such data if it is demonstrated that these sensors and their associated transducers are resistant to high neutron flux, high gamma radiation, and high temperature. To address this need, the Advanced Test Reactor National Scientific User Facility (ATRNSUF) is funding an irradiation, led by PSU, at the Massachusetts Institute of Technology Research Reactor to test the survivability of ultrasound transducers. As part of this effort, PSU and collaborators have designed, fabricated, and provided piezoelectric and magnetostrictive transducers that are optimized to perform in harsh, high flux, environments. Four piezoelectric transducers were fabricated with either aluminum nitride, zinc oxide, or bismuth titanate as the active element that were coupled to either Kovar or aluminum waveguides and two magnetostrictive transducers were fabricated with Remendur or Galfenol as the active elements. Pulse-echo ultrasonic measurements of these transducers are made insitu. This paper will present an overview of the test design including selection criteria for candidate materials and optimization of test assembly parameters, data obtained from both out-of-pile and in-pile testing at elevated temperatures, and an assessment based on initial data of the expected performance of ultrasonic devices in irradiation conditions.