kun yang

U3Si2 and U3Si5 are two important uranium silicide phases currently under extensive investigation as potential fuel forms or components for light water reactors (LWRs) to enhance accident tolerance. In this paper, their irradiation behaviors are studied by ion beam irradiations with various ion mass and energies, and their microstructure evolution are investigated by in-situ transmission electron microscopy (TEM). U3Si2 can easily be amorphized by ion beam irradiations (by 1 MeV Ar2+ or Kr2+) at room temperature with the critical amorphization dose less than 1 dpa. The critical amorphization temperatures of U3Si2 irradiated by 1 MeV Kr2+ and 1 MeV Ar2+ ion are determined as 580 ± 10 K and 540 ± 5 K, respectively. In contrast, U3Si5 remains crystalline up to 8 dpa at room temperature and is stable against ion irradiation-induced amorphization up to ~ 50 dpa by either 1 MeV Kr2+ or 150 KeV Kr+ at 623 K. These results provide valuable experimental data to guide future irradiation experiments, support the relevant post irradiation examination, and serve as the experimental basis for modeling validation.

Dense nanocrystalline and microcrystalline UO2 samples with controlled grain structure and stoichiometry were prepared by high energy ball milling and spark plasma sintering (SPS). Nano-indentationand micro-indentation testing were performed at different temperatures of 25
C, 300
C, and 600
C in order to study the mechanical properties of the sintered fuels as functions of grain structure and temperature. Nanocrystalline UO2 display higher hardness than microcrystalline counterpart, consistent with the Hall-Petch strengthening mechanism. Greater Young's modulus and fracture toughness are also identified for the nanocrystalline UO2, and hardness and Young's modulus decrease with temperature, suggesting better ductility of oxide fuels at high temperature and small length scale. Hyperstoichiometric UO2 specimen displays higher hardness and fracture toughness than stoichiometric UO2, due to the impediment of the crack propagation by the oxygen interstitial atoms. These results are useful in understanding the mechanical properties of the high burn-up structure (HBS) formed in nuclear fuels during reactor operation, and also provide critical experimental data as the input for the development and validation of the MARMOT fracture model of nuclear fuels.