Nilesh Kumar

This study investigated the susceptible sites for pit nucleation in a transformation-induced plasticity (TRIP) Fe39Mn20Co20Cr15Si5Al1 (at.%) high-entropy alloy (HEA) in 3.5 wt.% NaCl solution. The investigation involved a constant-load stress corrosion cracking (SCC) experiment. The SCC testing was interrupted at different pre-determined time intervals to characterize the specimen surface using a scanning electron microscope (SEM), electron backscattered diffraction (EBSD), and a three-dimensional optical stereomicroscope. The EBSD results revealed pit nucleation at the susceptible γ–ε interphase and ε–ε interlath/plate boundaries. The three-dimensional profile and SEM results indicated an increase in pit depth with no change in pit diameter on the surface of the specimen as the experiment progressed over time. This study highlights the importance of microstructural features and mechanical loading in the corrosion behavior of TRIP HEAs, providing insights into the mechanisms of pit nucleation and growth under aggressive environmental conditions.

High entropy alloys (HEAs) are a new class of metallic materials with five or more principal alloying elements. Due to this distinct concept of alloying, the HEAs exhibit unique properties compared to conventional alloys. The outstanding properties of HEAs include increased strength, superior wear resistance, high temperature stability, increased fatigue properties, good corrosion and oxidation resistance. Such characteristics of HEAs have generated significant interest among the scientific community however, their application is yet to be explored. This paper discusses the mechanical and microstructural behavior of CoCrFeNiMn HEA subjected to thermo-mechanical processing, and its potential application in peripheral vascular stent implants that are prone to high failure rate. Results show that CoCrFeNiMn has characteristics that can potentially find use in peripheral vascular stent implants and extend their life-cycle.